Skoda Felicia

Since 1994 of release

Repair and car operation



Shkoda Felitsija
+ Cars of mark Skoda Felicia
+ The maintenance instruction
+ Routine maintenance
+ Engine repair
+ Systems of cooling, heating
- The power supply system
   + The power supply system of the carburettor engine of 1.3 l
   + System of the central injection (SPFI) the petrol engine
   + System of the distributed injection (MPFI) the petrol engine
   + The power supply system of the diesel engine
   - Systems of decrease in toxicity and release of the fulfilled gases
      System of catching of fuel evaporations - the general information and replacement of components
      Ventilation system картера - the general information
      Removal and l-probe installation
      System recycling the fulfilled gases (EGR) - the general information and replacement of components
      Removal and installation of a final collector
      Release system - the general information and replacement of components
      The Katalitichesky converter - the general information and safety measures
+ Engine electric equipment
+ Coupling
+ Transmission
+ Power shafts
+ Brake system
+ Suspension bracket and steering
+ Body and salon furnish
+ Onboard electric equipment


c9b0dd5c

Ventilation system картера - the general information

The general information

The system of catching of fuel evaporations consists of the valve of the purge filled with activated coal of an adsorber and connecting hoses.

The purge valve is established in an arm on a back part of a mudguard of an arch of the left wheel. The adsorber is fixed by a special collar behind the valve.

Replacement of components

The valve of a purge of an adsorber

 PERFORMANCE ORDER

1. Switch off ignition, then disconnect from the valve electroconducting.

2. Having pulled the valve upwards, liberate its rubber support from a fixing collar.

3. Release collars and disconnect from the valve rubber hoses, just in case having marked them in order to avoid mess at connection.
4. Installation is made upside-down.


Coal adsorber


 PERFORMANCE ORDER

1. Disconnect from the top part of an adsorber the hoses brought to it going from a fuel tank and the valve of a purge.

2. Turn out a coupling bolt of a fixing collar and remove an adsorber).