Skoda Felicia

Since 1994 of release

Repair and car operation



Shkoda Felitsija
+ Cars of mark Skoda Felicia
+ The maintenance instruction
+ Routine maintenance
+ Engine repair
+ Systems of cooling, heating
+ The power supply system
+ Engine electric equipment
+ Coupling
+ Transmission
+ Power shafts
+ Brake system
+ Suspension bracket and steering
+ Body and salon furnish
- Onboard electric equipment
   The general information and safety measures
   Search of causes of failures of an electric equipment
   Safety locks, the relay and breakers - the general information
   Removal and installation of switches
   Replacement of lamps of external lighting and alarm devices
   Replacement of lamps of internal lighting devices
   Removal and installation of assemblages of external lighting and alarm devices
   Adjustment of a direction of an optical axis of head headlights - the general information and replacement of the mechanism of a regulator
   Removal and installation of an instrument guard
   Removal and installation of a cable of a drive of a speedometer
   Removal and installation прикуривателя
   Removal and installation of a small horn of a horn
   Removal and installation of levers of screen wipers
   Removal and installation of the electromotor and draughts of a drive of cleaners of a windscreen
   Removal and installation of the electromotor of a drive of a cleaner of back glass
   Removal and installation of components of washers wind glasses/lenses of head headlights / back glass
   Removal and autoradio tape recorder installation
   Removal and installation of loudspeakers
   Removal and installation of the aerial of a radio receiver
   The anticreeping alarm system/system иммобилизации the engine
   Removal and installation of components of a heating system of forward seats
   Safety pillow - the general information, safety measures and system deactivation
   Removal and installation of components of system of pillows of safety
   Diagnostics of electronic control systems by the engine and safety systems
   + Schemes of electric connections


c9b0dd5c

Removal and installation of components of washers wind glasses/lenses of head headlights / back glass

The tank of a liquid of washing of a windscreen is located in the right forward corner of an impellent compartment. On the models equipped with washers of lenses of head headlights the additional pump submitting a liquid from the tank on nozzles of washing of headlights is provided.

The tank of a liquid of washing wind glasses/lenses of head headlights


 PERFORMANCE ORDER

1. In an impellent compartment turn out bolts and remove from the top part of the tank clamping a lath.

2. Remove the tank from support, then disconnect hoses (try to remember an order of their connection). Disconnect from submitting pumps electroconducting and remove the tank from the car.

3. Installation is made upside-down. Track correctness of a lining and reliability of connection of electroconducting and hoses (the top hose in appropriate way is marked). In summary fill in in the tank necessary quantity of a fresh liquid and check up it on presence of signs of leaks.


The submitting pump

 PERFORMANCE ORDER

1. Remove the tank of a washing liquid.

2. Merge tank contents in suitable capacity, then accurately take the pump from the tank, trace remove the rubber plug through passage.

3. Installation is made upside-down. The defective plug through passage is subject to replacement. Having filled in a liquid in the tank, check up tightness of landing of the plug.


Nozzles of washers of a windscreen

 PERFORMANCE ORDER

1. Liberate a nozzle with a sealant from the landing nest and disconnect from it submitting hose.

2. At installation track reliability of fastening of a hose and density of landing of a nozzle. In case of need adjust a direction of giving of a stream, having taken advantage for this purpose of a thin core.


Nozzle of a washer of back glass

 PERFORMANCE ORDER

1. Liberate a nozzle with a sealant from the landing nest and disconnect from it submitting hose.

2. At installation track reliability of fastening of a hose and density of landing of a nozzle. Check up serviceability of functioning of a washer, in case of need adjust a direction of giving of a stream, having taken advantage for this purpose of a thin core.


Nozzles of washers of lenses of head headlights

 PERFORMANCE ORDER

1. Remove a forward bumper (see Has undressed Removal and installation of a forward bumper).
2. On models of early years of release give nuts of fastening of a nozzle to a bumper, remove washers, then take a nozzle from a bumper. In case of need removed block can be disassembled after скидывания a fixing clamp.
3. On models of late years of release of a nozzle fasten by means of clamps.
4. Installation is made upside-down. Check up serviceability of functioning snuffled, in case of need make updating of a direction of giving of streams (take advantage of a thin core).