Skoda Felicia

Since 1994 of release

Repair and car operation

Shkoda Felitsija
+ Cars of mark Skoda Felicia
+ The maintenance instruction
- Routine maintenance
   Weekly checks
   - Car routine maintenance - petrol models
      The routine maintenance schedule
      Regular service
      Replacement of impellent oil and the oil filter
      Condition check колодок and disks of forward brake mechanisms
      Check of serviceability of functioning of a control system by the engine
      Check and adjustment клапанных backlashes (model 1.3)
      Check of a condition of hoses, and revealing of sources of leaks
      Check of a condition of protective covers of power shafts
      Suspension bracket and steering drive
      Check of a condition of components of system of release of the fulfilled gases
      Check of a condition of a cooling liquid
      Check of serviceability of functioning of coupling
      Greasing of locks and loops
      Check of structure of the fulfilled gases
      Adjustment of an optical axis of head headlights
      Check of serviceability of functioning of cleaners/washers of glasses/lenses of head headlights
      Trial runs
      Replacement of a filtering element of an air cleaner
      Replacement of spark plugs - l models 1.3
      Check of a condition of a belt of drive ГРМ - l models 1.6
      Greasing of the distributor of ignition - l models 1.3
      Check of a condition of a belt of a drive of auxiliary units
      Check of system of pillows of safety
      Check of serviceability of functioning of systems of decrease in toxicity of the fulfilled gases of the engine
      Check of a condition of boots and drums of back brake mechanisms
      Check of serviceability of functioning of a lay brake
      Check кузовных panels on presence of traces of development of corrosion
      Level check трансмиссионного oils
      Replacement of spark plugs - l models 1.6
      Replacement of the fuel filter
      Replacement трансмиссионного oils
      Replacement газораспределительного a belt - l models 1.6
      Replacement of a brake liquid
      Replacement of a cooling liquid
   + Car routine maintenance - diesel models
+ Engine repair
+ Systems of cooling, heating
+ The power supply system
+ Engine electric equipment
+ Coupling
+ Transmission
+ Power shafts
+ Brake system
+ Suspension bracket and steering
+ Body and salon furnish
+ Onboard electric equipment

Replacement of a filtering element of an air cleaner

Models 1.3 of l with SPFI

PERFORMANCE ORDER

1. Release the wire clamps located on perimetre of the top cover of a casing of an air cleaner.

2. Turn out three fixing bolts and...

... Accurately lift a cover having provided an easy approach to a filtering element. Try not to shift in the course of removal of a cover an air cleaner casing.

3. Take from an air cleaner casing filtering element.

4. Remove from a casing of an air cleaner a dust and small dust (try that the dirt did not get to a mouth of the case of a throttle. Wipe internal surfaces of a casing and an air cleaner cover.
5. According to landing marks establish a replaceable filtering element.
6. Close an air cleaner cover, screw three fixing bolts and tighten them with demanded effort.
7. Latch lateral clamps of a cover.

Models 1.3 with MPFI and 1.6 l

PERFORMANCE ORDER

1. Release four wire clamps, located on perimetre of the top cover of a casing of an air cleaner.

2. Now the cover can be raised so that there was a possibility of extraction from a casing of an air cleaner of a filtering element - try to remember adjusting position of the last.

3. In case of need maintenance большего working space suitable flat-nose pliers compress legs of a spring collar of fastening to the top cover of a sleeve of an air inlet. Disconnect a sleeve from a branch pipe of a cover and remove last from a casing. Alternatively, uncover together with a cover of the case of a throttle.
4. Remove from a casing of an air cleaner a dust and small dust.
5. According to landing marks establish a replaceable filtering element. Track reliability of landing of edges of the filter.
6. Establish into place the top cover and fix its four wire clips. If removed, connect to a cover an air inlet sleeve. Fix a sleeve a spring collar. If uncovered, without disconnecting a sleeve (together with a cover of the case of a throttle), address to materials of the Head the Power supply system.