Skoda Felicia

Since 1994 of release

Repair and car operation



Shkoda Felitsija
+ Cars of mark Skoda Felicia
+ The maintenance instruction
- Routine maintenance
   Weekly checks
   - Car routine maintenance - petrol models
      The routine maintenance schedule
      Regular service
      Replacement of impellent oil and the oil filter
      Condition check колодок and disks of forward brake mechanisms
      Check of serviceability of functioning of a control system by the engine
      Check and adjustment клапанных backlashes (model 1.3)
      Check of a condition of hoses, and revealing of sources of leaks
      Check of a condition of protective covers of power shafts
      Suspension bracket and steering drive
      Check of a condition of components of system of release of the fulfilled gases
      Check of a condition of a cooling liquid
      Check of serviceability of functioning of coupling
      Greasing of locks and loops
      Check of structure of the fulfilled gases
      Adjustment of an optical axis of head headlights
      Check of serviceability of functioning of cleaners/washers of glasses/lenses of head headlights
      Trial runs
      Replacement of a filtering element of an air cleaner
      Replacement of spark plugs - l models 1.3
      Check of a condition of a belt of drive ГРМ - l models 1.6
      Greasing of the distributor of ignition - l models 1.3
      Check of a condition of a belt of a drive of auxiliary units
      Check of system of pillows of safety
      Check of serviceability of functioning of systems of decrease in toxicity of the fulfilled gases of the engine
      Check of a condition of boots and drums of back brake mechanisms
      Check of serviceability of functioning of a lay brake
      Check кузовных panels on presence of traces of development of corrosion
      Level check трансмиссионного oils
      Replacement of spark plugs - l models 1.6
      Replacement of the fuel filter
      Replacement трансмиссионного oils
      Replacement газораспределительного a belt - l models 1.6
      Replacement of a brake liquid
      Replacement of a cooling liquid
   + Car routine maintenance - diesel models
+ Engine repair
+ Systems of cooling, heating
+ The power supply system
+ Engine electric equipment
+ Coupling
+ Transmission
+ Power shafts
+ Brake system
+ Suspension bracket and steering
+ Body and salon furnish
+ Onboard electric equipment


c9b0dd5c

Suspension bracket and steering drive

Forward suspension bracket and steering drive

 PERFORMANCE ORDER

1. Поддомкратьте redock of the car also establish it on props.

2. Make visual check of a condition dusterов spherical support and protective covers картера the helmsman рейки. Replace the worn out or supposing leaks covers - hit inside dusterов a dirt or a moisture conducts to acceleration of deterioration of spherical support and components реечной transfers.

3. On the models, the equipped system of hydrostrengthening of a wheel, check up a condition of hoses PAS. Examine on presence of signs of leaks штуцерные connections of hydraulic lines and covers картера the steering mechanism. Podtekanie oils through protective covers at pressure increase inside картера the helmsman рейки usually testifies to deterioration of epiploons.

4. Grasp a forward wheel of the car in points on 12 both at 6 o'clock and sharply pull it. Presence of the slightest appreciable люфта demands carrying out of investigation of the reasons of its occurrence. Continuing to pull a wheel, ask the assistant to squeeze out a pedal of a foot brake. If люфт thus will disappear or it will considerably be reduced, deterioration ступичных bearings hence takes place. Otherwise it is necessary to check up a condition of hinges and support of components of a suspension bracket.

5. Now grasp a wheel in points on 9 and at 3 o'clock and repeat check. Люфт besides it can appear it is connected with deterioration ступичных bearings. The second possible reason of a weak point is deterioration of tips of steering draughts. At deterioration of external tips usually takes place visual люфт wheels. For an estimation of degree of deterioration of the hinge of an internal tip put a hand on a protective cover картера реечной the transfers, the second hand grasp draught. If now to pull a wheel, it will be possible to feel люфт in the worn out hinge.
6. By means of mount or the big screw-driver estimate degree of deterioration of plugs of support of a suspension bracket: get the lever between a corresponding component and its reference point. Presence small люфта quite naturally also speaks elasticity of rubber inserts, however the excessive weak point testifies to deterioration of a support. In parallel, visually estimate a condition of all rubber pillows opened to access and inserts. Pay attention to such defects, as cracks, stratifications, ruptures, signs of ageing of a material, etc.
7. Lower the car on the earth and ask the assistant повращать a steering wheel approximately on 1/8 turns in each of the parties. The delay in reaction of operated wheels to steering wheel rotation (люфт) should be very insignificant, and in an ideal to be absent at all. Otherwise check up a condition of hinges and support of components of a suspension bracket and a steering drive. Estimate deterioration degree карданных hinges of a steering column, and also components actually реечной transfers.


Back suspension bracket

 PERFORMANCE ORDER

1. Prop up wedges forward wheels, then поддомкратьте a back of the car and establish it on props.
2. Operating, as it is described above for a forward suspension bracket, estimate deterioration degree ступичных bearings, suspension bracket plugs, and at a corresponding complete set - support of rack-mount shock-absorbers.


Racks of a suspension bracket and shock-absorbers

 PERFORMANCE ORDER

1. Check up shock-absorbers on presence of traces of leaks of a hydraulic liquid on the case, rubber dusterе and through a piston rod. Leaks testify to internal defect of the shock-absorber and necessity of carrying out of replacement.

Replacement of rack-mount assemblages/shock-absorbers is always made in steam for the given bridge of a suspension bracket.

2. Efficiency of action of rack-mount assemblages can be checked up by serial нажимания on each of car corners. At release a corner the body should come back in a starting position without rocking. Otherwise the corresponding shock-absorber requires more detailed attention. Do not forget to estimate also degree of deterioration of components of the top and bottom support of shock-absorbers.