|
|
1. The condition auxiliary drive a belt can be checked up visually. It is necessary to pay attention to presence of attritions, cracks, stratifications and so forth of Defects. For survey of the ridge party of a belt overwind it. |
|
|
2. For the purpose of maintenance of the best access to a belt поддомкратьте the right forward corner of the car, then turn out screws of fastening of a metal cover covering a belt. |
3. For belt survey on all its length turn a cranked shaft for a bolt of its pulley.
4. In case of revealing of defects the belt is subject to replacement (engine Repair see the Head).
5. On l models 1.6 (and models 1.3 of the l equipped К/В) a belt it is equipped automatic натяжителем that is why adjustment of effort of a tension does not require.
6. On models 1.3 of l without К/В check of effort of a tension of a belt can be made a way нажимания on it on a site in the middle between pulleys of the generator and the water pump. At firm нажимании a thumb of a hand the size of a deflection of a belt should lie in limits from 10 mm to 15 mm. Otherwise it is necessary to make updating (engine Repair see the Head).
7. In summary, if removed, establish into place a belt cover, then lower the car on the earth. |
