Skoda Felicia

Since 1994 of release

Repair and car operation



Shkoda Felitsija
+ Cars of mark Skoda Felicia
+ The maintenance instruction
+ Routine maintenance
- Engine repair
   - Repair without extraction from the car of the petrol engine of 1.3 l
      The description of the basic knots and mechanisms
      Check of a condition of shatunno-piston group on hearing and measurement компрессионного pressure in cylinders
      Reduction of the piston of the first cylinder in position of the top dead point (ВМТ)
      Removal and installation of a cover of a casing of a camshaft
      Removal, check of a condition and installation of assemblage of an axis коромысел
      Removal and installation of a head of cylinders in gathering with the inlet pipeline and a final collector
      Removal, check of a condition and installation of a forward cover, chain and asterisks of drive ГРМ
      Removal, check of a condition and installation of components of the oil pump
      Removal and pallet installation картера the engine
      Replacement of epiploons of a cranked shaft
      Removal, check of a condition and flywheel installation
      Check of a condition and replacement of rubber pillows of support of a suspension bracket of the power unit
      Removal, installation and adjustment of effort of a tension of a belt of a drive of auxiliary units
   + Repair without extraction from the car of the petrol engine of 1.6 l
   + Repair without extraction from the car of the diesel engine
   + Dismantle of the power unit and engine major repairs
+ Systems of cooling, heating
+ The power supply system
+ Engine electric equipment
+ Coupling
+ Transmission
+ Power shafts
+ Brake system
+ Suspension bracket and steering
+ Body and salon furnish
+ Onboard electric equipment


c9b0dd5c

Check of a condition and replacement of rubber pillows of support of a suspension bracket of the power unit

The detailed information on placing and the device of support of the power unit is resulted in Section Removal from the car of the power unit - preparation and safety measures, the general data on a suspension bracket of the power unit.

CHECK

 PERFORMANCE ORDER

1. Поддомкратьте redock of the car also establish it on props.
2. Check up pillows of support of a suspension bracket of the power unit on presence of cracks, signs of hardening of a material, отслоений rubbers from a metal basis of other damages. Defective support are subject to replacement.
3. With the help динамометрического a key check up correctness of efforts of a tightening of carving connections of support.
4. Using as the lever the big screw-driver or mount, estimate degree of deterioration of support (in case of need take advantage of the help of the assistant). In case of revealing excessive люфта replace the worn out components, preliminary having made sure of reliability of a tightening of fixture.

REPLACEMENT

The right support

 PERFORMANCE ORDER

The rubber pillow of the right support is built in in the case of the water pump. Pillow extraction is made by means of a hydraulic press, or a set бородков with remote plugs. Performance of the given work will charge more correctly to experts of a workshop of car-care centre.


The left support


 PERFORMANCE ORDER

The pillow of the left support is built in in a face cover картера transmissions and can be taken in a workshop of the firm service-centre of company Skoda by means of a special stripper.


Back support


 PERFORMANCE ORDER

1. The lever support of a back suspension bracket is equipped by two rubber торсионными the inserts, one of which (main) запрессована in an arm fixed on a back wall картера РКПП, the second, the smaller size the rubber plug, запрессована in a back part of a side scene of a stretcher of a forward suspension bracket. Replacement of rubber components of a support is made in the conditions of a car-care centre workshop as for its performance special adaptations are required.

2. For extraction main торсионной inserts prop up the power unit the second jack (for the purpose of loading distribution lay between a head of a jack and the pallet картера wooden брусок). Remove a nut and a through bolt of fastening of a support to a stretcher side scene. Give two bolts and a nut (on models of last years of release - three nuts) support fastenings to картеру transmissions and remove assemblage of a support from the car.

3. For side scene removal give a nut of fastening of its back part to a basic arm on a stretcher, take a through bolt with a washer. Then give a nut and take a through bolt of fastening of a side scene to an arm of the main support. Remove a side scene and take it from under the car.
4. Installation is carried out upside-down. Track observance of efforts of a tightening of fixture.