Skoda Felicia

Since 1994 of release

Repair and car operation



Shkoda Felitsija
+ Cars of mark Skoda Felicia
+ The maintenance instruction
+ Routine maintenance
- Engine repair
   - Repair without extraction from the car of the petrol engine of 1.3 l
      The description of the basic knots and mechanisms
      Check of a condition of shatunno-piston group on hearing and measurement компрессионного pressure in cylinders
      Reduction of the piston of the first cylinder in position of the top dead point (ВМТ)
      Removal and installation of a cover of a casing of a camshaft
      Removal, check of a condition and installation of assemblage of an axis коромысел
      Removal and installation of a head of cylinders in gathering with the inlet pipeline and a final collector
      Removal, check of a condition and installation of a forward cover, chain and asterisks of drive ГРМ
      Removal, check of a condition and installation of components of the oil pump
      Removal and pallet installation картера the engine
      Replacement of epiploons of a cranked shaft
      Removal, check of a condition and flywheel installation
      Check of a condition and replacement of rubber pillows of support of a suspension bracket of the power unit
      Removal, installation and adjustment of effort of a tension of a belt of a drive of auxiliary units
   + Repair without extraction from the car of the petrol engine of 1.6 l
   + Repair without extraction from the car of the diesel engine
   + Dismantle of the power unit and engine major repairs
+ Systems of cooling, heating
+ The power supply system
+ Engine electric equipment
+ Coupling
+ Transmission
+ Power shafts
+ Brake system
+ Suspension bracket and steering
+ Body and salon furnish
+ Onboard electric equipment


c9b0dd5c

Removal and pallet installation картера the engine

REMOVAL

 PERFORMANCE ORDER

1. Disconnect a negative wire from the battery.
2. Prop up wedges back wheels of the car, then поддомкратьте redock of the car and establish it on props.
3. Merge impellent oil, then screw into place a drain stopper and tighten it with demanded effort. If time of replacement of oil according to the routine maintenance Schedule (Routine maintenance see the Head) comes nearer, replace the oil filter.

4. Under the car turn out a bolt of fastening of a branch pipe охладительного a path to an arm at the right end face of the pallet картера.

5. In sequence, to return specified in illustrations, in stages give bolts of fastening of the pallet. Try to remember adjusting position of an arm of a tube охладительного a path for which fixing the right bolt of fastening of the pallet is used.

6. Обстучите the pallet a palm for the purpose of its branch from the engine block, then lower and take from under the car.
7. Taking an opportunity, wash out the mesh filter маслозаборника. At strong pollution of a grid replace the filter (in case of need see Has undressed Removal, check of a condition and installation of components of the oil pump).

INSTALLATION

 PERFORMANCE ORDER

1. Carefully smooth out interfaced surfaces of the pallet and the block of cylinders, completely having removed from them oil traces, then dry wipe the pallet and internal surfaces of the engine pure rags.

2. Lay on an interfaced surface of the pallet a new lining,

... Press the pallet to the engine and by hand tighten fixing bolts.

3. Operating in an order specified in illustrations, tighten bolts of the pallet with demanded effort.

4. Screw and strongly tighten a bolt of fastening of a tube охладительного a path. Lower the car on the earth and connect a negative wire to the battery.
5. Fill in in the engine engine oil (Routine maintenance see the Head).