Skoda Felicia

Since 1994 of release

Repair and car operation


Shkoda Felitsija
+ Cars of mark Skoda Felicia
+ The maintenance instruction
+ Routine maintenance
- Engine repair
   - Repair without extraction from the car of the petrol engine of 1.3 l
      The description of the basic knots and mechanisms
      Check of a condition of shatunno-piston group on hearing and measurement компрессионного pressure in cylinders
      Reduction of the piston of the first cylinder in position of the top dead point (ВМТ)
      Removal and installation of a cover of a casing of a camshaft
      Removal, check of a condition and installation of assemblage of an axis коромысел
      Removal and installation of a head of cylinders in gathering with the inlet pipeline and a final collector
      Removal, check of a condition and installation of a forward cover, chain and asterisks of drive ГРМ
      Removal, check of a condition and installation of components of the oil pump
      Removal and pallet installation картера the engine
      Replacement of epiploons of a cranked shaft
      Removal, check of a condition and flywheel installation
      Check of a condition and replacement of rubber pillows of support of a suspension bracket of the power unit
      Removal, installation and adjustment of effort of a tension of a belt of a drive of auxiliary units
   + Repair without extraction from the car of the petrol engine of 1.6 l
   + Repair without extraction from the car of the diesel engine
   + Dismantle of the power unit and engine major repairs
+ Systems of cooling, heating
+ The power supply system
+ Engine electric equipment
+ Coupling
+ Transmission
+ Power shafts
+ Brake system
+ Suspension bracket and steering
+ Body and salon furnish
+ Onboard electric equipment

c9b0dd5c

Removal, check of a condition and installation of assemblage of an axis коромысел

REMOVAL

 PERFORMANCE ORDER

1. Uncover heads of cylinders (see Has undressed Removal and installation of a cover of a casing of a camshaft).
2. With the help пруткового a key turn out two bolts of a head of the cylinders, used for fastening of the left and right support of an axis коромысел to a head of cylinders.

3. In stages (on 1/2 turns for the approach) in regular intervals ослабьте bolts of fastening of an axis коромысел, having released the last from influence of the effort developed клапанными by springs. Turn out bolts, having remembered an initial arrangement маслоотражателя, and take axis assemblage коромысел from a head of cylinders.

4. In case of need remove from an axis components, preliminary having removed a lock ring.

5. Put removed components as their installation on an axis.


Condition check

 PERFORMANCE ORDER

Check up working surfaces of an axis (a landing place коромысел and bearings) on presence of signs of deterioration, scratches and задиров. Worn out an axis and-or коромысла are subject replace.

INSTALLATION

 PERFORMANCE ORDER

1. Operating in an order, the return to a dismantle order, put on an axis коромысел the components removed from it (in a correct order). Fix assemblage by a lock ring, having tracked correctness of landing of the last in the flute. Make sure of rotation freedom коромысел on an axis.

2. Lower assemblage on the regular place in a head of cylinders. Track correctness of gearing of adjusting screws коромысел in end faces of bars of corresponding pushers.

3. Screw fixing bolts (do not forget to establish on the right support a plate маслоотражателя) and in stages in regular intervals tighten them with demanded effort.

4. Screw two bolts of a head of the cylinders, used for fastening of support of an axis коромысел, and tighten them in three stages.
5. Make adjustment клапанных backlashes (Routine maintenance see the Head).
6. Establish into place a cover of a head of cylinders (see Has undressed Removal and installation of a cover of a casing of a camshaft).