Skoda Felicia

Since 1994 of release

Repair and car operation


Shkoda Felitsija
+ Cars of mark Skoda Felicia
+ The maintenance instruction
+ Routine maintenance
+ Engine repair
+ Systems of cooling, heating
+ The power supply system
- Engine electric equipment
   + Charge and start systems
   - System of ignition of petrol engines
      The general information
      Diagnostics of malfunctions of system of ignition and check of a condition of its components
      Removal and installation of the coil of ignition
      Removal and installation of the distributor of ignition
      Check and updating of a corner of an advancing of ignition
      Removal and installation of information gauges of system of ignition
   + System of preheat of diesel engines
+ Coupling
+ Transmission
+ Power shafts
+ Brake system
+ Suspension bracket and steering
+ Body and salon furnish
+ Onboard electric equipment

c9b0dd5c

Removal and installation of the coil of ignition

REMOVAL

 PERFORMANCE ORDER

Make sure that ignition is switched off, then disconnect a negative wire from the battery.


System Bosch Mono-Motronic

 PERFORMANCE ORDER

1. The ignition coil is established in a forward part of a mudguard of an arch of the right wheel, in the neighbourhood with the distributor.

2. Disunite НВ a coil socket, and also disconnect from it ВВ a wire

3. Turn out fixing bolts and remove the coil.


System Simos 2P

 PERFORMANCE ORDER

1. The bobbin module of system is established on spark plugs in a forward part of the engine.

2. Disunite an electric socket at a module end face.

3. Turn out two fixing bolts in the bottom part of the module.

4. Accurately, trying to incline not too strongly, remove the module from spark plugs.


System Magneti-Marelli 1AV

 PERFORMANCE ORDER

1. The ignition coil is established on a mudguard of an arch of the left wheel, near to ECU.
2. Disunite НВ an electric socket and disconnect from coil VV a wire.
3. Give fixture (nuts/bolts) and remove the coil from a basic plate.

INSTALLATION

 PERFORMANCE ORDER

Installation is made upside-down. Track reliability of electric connections.