Skoda Felicia

Disconnect a negative wire from the battery.

1. Components of door assemblage are presented on an illustration.

2. On models with a manual drive Glass lifts having hooked, remove a decorative cover of the handle of podnimanija/lowering of glass. Turn out the fixing screw and remove the handle from a spindle. Remove a remote washer.

3. Turn out the button of deenergizing of a door-lock, having disconnected it from an executive rod.

4. Lift the internal handle of a door, then cautiously release clamps and remove from the handle the panel of decorative furnish.

5. Turn out fixing screws and remove the door handle from the panel of an internal upholstery. In case of need disunite a socket of electroconducting of the switch of the electric drive of a rear-view mirror as soon as access to it will open.

6. At a corresponding complete set remove a decorative cap and turn out the screw of fastening of the panel of an internal upholstery to a door.

7. Accurately hooking the panel, liberate it from clamps and separate from a doorframe. At a corresponding complete set liberate from the panel electroconducting and disunite its sockets.

1. Execute the procedures described in paragraphs with 2 on 5.
2. Accurately hooking the panel, liberate it from clamps and separate from a doorframe.

Installation is made upside-down. Before to latch the panel in clamps, make sure of correctness of a lining and продевании in the provided apertures of electroconducting (at a corresponding complete set).