Skoda Felicia

Since 1994 of release

Repair and car operation



Shkoda Felitsija
+ Cars of mark Skoda Felicia
+ The maintenance instruction
+ Routine maintenance
+ Engine repair
+ Systems of cooling, heating
+ The power supply system
+ Engine electric equipment
+ Coupling
+ Transmission
+ Power shafts
+ Brake system
+ Suspension bracket and steering
- Body and salon furnish
   The general information and safety measures
   Care of components of a body and the car bottom
   Care of an upholstery and carpet coverings of salon
   Repair of insignificant damages кузовных panels
   Repair seriously damaged кузовных panels
   Removal and installation of a forward bumper
   Removal and installation of a back bumper
   Removal, installation and cowl adjustment
   Removal and installation drive a cable отпускания the cowl lock
   Removal, installation and adjustment of assemblage of the lock of a cowl
   Removal and installation of doors
   Removal and installation of panels of an internal upholstery of doors
   Removal and installation of door handles and lock components
   Removal and installation of door glasses and regulators Glass lifts
   Removal and installation of a door of a back and its persistent bars
   Removal, installation and adjustment of components of the lock of a door of a back
   Removal and installation of components of the uniform lock
   Removal and installation of components of the electric drive Glass lifts
   Removal and installation of external rear-view mirrors and accompanying components
   Windscreen and glass of a door of a back - the general information
   The top hatch
   Removal and installation of elements кузовной furnish
   Removal and installation of seats
   The mechanism натяжителя a seat belt of a forward seat - the general information
   Removal and installation of components of seat belts
   Removal and installation of elements of furnish of salon
   Removal and installation of the central console
   Removal and installation of the panel of devices
   Control кузовные the sizes
+ Onboard electric equipment


c9b0dd5c

Removal and installation of external rear-view mirrors and accompanying components

Components of assemblage of an external rear-view mirror

1 — the Case
2 — mirror Glass
3 — Fixing screws
4 — the Panel of decorative furnish

5 — the Nut
6 — the Protective cover
7 — the Screw


Assemblages of mirrors with manual adjustment of position


 PERFORMANCE ORDER

1. Typical components of assemblage of an external rear-view mirror are presented on an illustration.
2. Remove from the handle of adjustment of position of a mirror a rubber protective cover, then give a nut on the regulator case.

3. Having hooked, remove decorative заглушку, give the fixing screw and remove from a door the triangular decorative panel.

4. Turn out fixing screws and remove assemblage of a mirror from a door. Remove изоляционную a lining established between a support of a mirror and a door and check up its condition. The defective lining is subject to replacement.

5. Installation is made upside-down.


Assemblages электроdrivers mirrors


 PERFORMANCE ORDER

1. Having hooked, take decorative заглушку, then turn out the fixing screw and remove from a door the triangular decorative panel.
2. Turn out fixing screws and remove assemblage of a mirror from a door, in passing having disunited an electroconducting socket. Remove изоляционную a lining. The damaged lining is subject to replacement.
3. Installation is made upside-down.


Mirror glass

 PERFORMANCE ORDER

Glass is latched in a framework by means of clamps and at inaccurate performance of procedure can easily burst.

1. Incline mirror glass against the stop upwards, then pass a plastic or wooden wedge between the basis of glass and a casing of a framework and, accurately having hooked, separate glass from drive the electromotor/regulator.
2. Remove glass from a framework and disconnect electroconducting from a heating element.
3. At installation do not forget to connect electroconducting and track reliability защелкивания glasses on the electromotor/regulator (put effort only to the central part of glass for the purpose of minimisation of casual damage of the last). Having made sure of reliability of fixing of glass, adjust mirrors, having resulted it into position.


The management switch

The Onboard electric equipment see the Head.