Skoda Felicia

Since 1994 of release

Repair and car operation



Shkoda Felitsija
+ Cars of mark Skoda Felicia
+ The maintenance instruction
+ Routine maintenance
+ Engine repair
+ Systems of cooling, heating
+ The power supply system
+ Engine electric equipment
+ Coupling
+ Transmission
+ Power shafts
+ Brake system
+ Suspension bracket and steering
- Body and salon furnish
   The general information and safety measures
   Care of components of a body and the car bottom
   Care of an upholstery and carpet coverings of salon
   Repair of insignificant damages кузовных panels
   Repair seriously damaged кузовных panels
   Removal and installation of a forward bumper
   Removal and installation of a back bumper
   Removal, installation and cowl adjustment
   Removal and installation drive a cable отпускания the cowl lock
   Removal, installation and adjustment of assemblage of the lock of a cowl
   Removal and installation of doors
   Removal and installation of panels of an internal upholstery of doors
   Removal and installation of door handles and lock components
   Removal and installation of door glasses and regulators Glass lifts
   Removal and installation of a door of a back and its persistent bars
   Removal, installation and adjustment of components of the lock of a door of a back
   Removal and installation of components of the uniform lock
   Removal and installation of components of the electric drive Glass lifts
   Removal and installation of external rear-view mirrors and accompanying components
   Windscreen and glass of a door of a back - the general information
   The top hatch
   Removal and installation of elements кузовной furnish
   Removal and installation of seats
   The mechanism натяжителя a seat belt of a forward seat - the general information
   Removal and installation of components of seat belts
   Removal and installation of elements of furnish of salon
   Removal and installation of the central console
   Removal and installation of the panel of devices
   Control кузовные the sizes
+ Onboard electric equipment


c9b0dd5c

Care of components of a body and the car bottom

It is necessary to remember that a primary factor defining selling cost of the second-hand car, the condition of its body is. Care procedures кузовными panels are extremely simple, but should be carried out on a regular basis. The scornful relation to the smallest mechanical defects and damages of a paint and varnish covering can lead to fast development of corrosion and necessity of performance expensive кузовного repair. Important also regularly to check a condition of the surfaces hidden from a sight and details, such as arches of wheels, the bottom part of partitions of an impellent compartment, etc.

Base procedure on care of a car body is its sink, preferably plentiful quantity of water, submitted under pressure from a hose. Powerful enough stream easily softens and forces down the dried up dirt and that is important, allows to avoid damage of a paint and varnish covering at a friction about it of separate grains of sand and other abrasive particles. Do not forget to wash out a stream also an arch of wheels and bearing elements of the bottom of the car. Strangely enough, the best time for performance of a sink of elements of a suspension bracket and the car bottom is damp rainy weather when the most part of the accumulated mud adjournment is washed off automatically during movement. Try not to miss possibility and, taking an opportunity, make external survey of the components located under the car.

From time to time it is necessary to make check of a condition of an anticorrosive covering of the bottom of the car. Preliminary it is necessary to subject the car bottom, including an impellent compartment, steam cleaning in which course multilayered oil adjournment, sticky шлам and a dense dirt especially well leave. If possibility of application of steam cleaning is absent, it is necessary to process by means of a brush surfaces of components subject to cleaning by one of set of solvents let out now.

Last method should not be applied on cars, the anticorrosive which covering of the bottom has a wax basis. Annual survey of such cars should be made before the beginning of a winter season after good размачивания mud and oil adjournment in the conditions of the raised humidity, characteristic for an autumn season. The damaged anticorrosive covering should be immediately restored. In an ideal, once a year it is necessary to make full anticorrosive processing of the car at which the protective structure is blown in a cavity of door panels, thresholds, box-shaped sections bearing кузовных elements and other accessible cavities.

The last does not concern panels and the sections subjected to full anticorrosive processing and загерметизированным industrially.


Completely having washed off a dirt from a paint and varnish covering, wipe surfaces кузовных panels soft suede, returning to polishing initial shine. Processing of surfaces by a polyrole containing wax provides additional protection of a paint and varnish covering against atmospheric influences and allows to restore locally lost polishing. Remember that tarnishing of a paint and varnish covering is connected with the scornful relation to a regular sink of the car more often. Paint and varnish coverings of type "metallic" require special leaving with application of special, not containing abrasives of polyroles. Try to check regularly passableness of drainage and ventilating apertures кузовных panels. Do not forget to wipe from time to time some glass, by means of special cleaning structures deleting from their surface a road film. At all do not use for processing of glasses polyroles containing wax or means for натирки the chromeplated elements of furnish.

It is not necessary to use at cleaning of vinyl panels детергентами, каустической soda, or cleaners on an oil basis. For this purpose the warm solution of soap in water perfectly approaches. The eaten dirt well leaves by means of a soft brush (with soap). Cleaning of vinyl panels is made with the same frequency, as a sink of a body of the car. On termination of panel cleaning can be processed one of high-quality protective structures for rubbers and plastics. The same means suit processing of tyres, sealing strips кузовных panels, vacuum hoses and other rubber and plastic components.