Skoda Felicia

1. Park the car on an equal platform, cock a lay brake and prop up wedges back wheels. Release nuts of fastening of the right forward wheel.
2. Поддомкратьте redock of the car also establish it on props. Remove the right forward wheel.
3. Turn out screws of fastening of a cover of a belt.
4. Check up a belt on presence of factory directional markers of rotation. In case of need put corresponding marks independently.

1. On one-two turn ослабьте the top and bottom bolts of fastening of the generator.
2. Shift the generator down to an emphasis, turning it round the top support and overcoming resistance of a spring.

Put on a belt a pulley of a cranked shaft. Track that belt edges have got in the correct image to reciprocal streams of a pulley.

1. A nakidnym key develop натяжитель a belt for the central nut clockwise.
2. Get a belt the flat party under a roller натяжителя, then throw with it corresponding pulleys. Track correctness of hit of edges of a belt in streams of pulleys.
3. The belt tension will occur automatically at release натяжителя.

1. Overcoming resistance of a spring, some times shift the generator down to an emphasis, checking serviceability of its returning in a starting position at release. In case of need release bolts for a half-turn.
2. Keeping the generator in the wrung out position, put on a belt its pulley. Release the generator - the belt thus should stretch under the influence of a spring.
3. Without tightening generator bolts, start the engine, allow to it to work on single turns within nearby 10 seconds.
4. Muffle the engine and tighten with demanded effort at first the bottom bolt, then top.

1. Establish into place a belt cover. Strongly tighten bolts of its fastening.
2. Establish the right forward wheel and lower the car on the earth. Tighten nuts of fastening of a wheel with demanded effort.