Skoda Felicia

Since 1994 of release

Repair and car operation

réviser avec l'ia

Removal, major repairs and installation of racks of a back suspension bracket

At assemblage the new nut of the bottom fixing bolt is required.

REMOVAL

PERFORMANCE ORDER

1. For providing of access to the top support of a rack of a back suspension bracket on models of Hetchbek liberate from clamps and remove the lateral panel of an upholstery from the corresponding party of a luggage space.

2. On models the Versatile person remove a decorative cover of the panel of a lateral upholstery from the corresponding party of a luggage space, then give the top and bottom screws of fastening of the panel. Liberate from clamps and unbend back a carpet covering.

3. On all models prop up wedges forward wheels, then поддомкратьте a back of the car and establish it on props. Remove a corresponding back wheel.

4. In a luggage space remove a protective cap of the top support of a rack of a suspension bracket, then give a fixing nut and remove a washer. Trying to remember adjusting position of each of components, remove тарельчатую a washer, a rubber pillow of a support, ring and remote plugs.

5. From under the car give a nut and take a bolt of the bottom support of a rack. Remove a rack.

At assemblage the nut of a fixing bolt is subject to replacement without fail. Check up a rubber pillow of the top support on presence of signs of ageing of a material and mechanical damages. In case of need make replacement.

INSTALLATION

PERFORMANCE ORDER

1. Get a rack on the regular place, having tracked correctness of its arrangement rather кузовных elements. Insert a through bolt of the bottom support, screw a nut, having tightened while only by hand.
2. In a luggage space establish on a rack remote and ring plugs, then a rubber pillow and тарельчатую a washer.
3. Establish a washer, screw the top fixing nut and tighten it with demanded effort. Establish a protective cap of the top support of a rack, then return into place the decorative panel of a lateral upholstery of a luggage space.

4. Establish into place a wheel, then lower the car on the earth and tighten with demanded effort wheel bolts. Shake the car for усадки rack components, then tighten with demanded effort a nut of a bolt of fastening of the bottom support of a rack.