Skoda Felicia

Since 1994 of release

Repair and car operation



Shkoda Felitsija
+ Cars of mark Skoda Felicia
+ The maintenance instruction
+ Routine maintenance
+ Engine repair
+ Systems of cooling, heating
+ The power supply system
+ Engine electric equipment
+ Coupling
+ Transmission
+ Power shafts
+ Brake system
- Suspension bracket and steering
   The general information and safety measures
   Removal and installation ступичных assemblages of forward wheels
   Replacement of bearings of forward wheels
   Removal and installation of racks of a forward suspension bracket
   Major repairs of racks of a forward suspension bracket
   Removal, major repairs and installation of the bottom levers of a forward suspension bracket
   Replacement of spherical support of the bottom levers of a forward suspension bracket
   Removal and installation of the stabilizer of cross-section stability of a forward suspension bracket
   Removal and installation of racks of a bar of the stabilizer of cross-section stability of a forward suspension bracket
   Removal and installation of a forward stretcher
   Replacement of bearings of back naves
   Removal, major repairs and installation of racks of a back suspension bracket
   Major repairs of racks of a back suspension bracket
   Removal, major repairs and installation of pins of the back bridge
   Removal and installation of the back stabilizer of cross-section stability
   Removal and installation of the back bridge
   Removal and steering wheel installation
   Removal and installation of a steering column
   Major repairs of a steering column
   Removal and installation of assemblage of the lock of ignition/blocking of a wheel
   Removal, major repairs and installation of the steering mechanism
   Replacement of rubber protective covers картера the steering mechanism
   Removal of air stoppers from a hydraulic path of system of strengthening of a wheel
   Removal and installation of the helmsman наcоса
   Removal and installation of external tips of steering draughts
   Removal and installation of steering draught
   Corners of installation of wheels of the car - the general information
+ Body and salon furnish
+ Onboard electric equipment


c9b0dd5c

Removal and installation of racks of a bar of the stabilizer of cross-section stability of a forward suspension bracket

REMOVAL

 PERFORMANCE ORDER

1. Prop up wedges back wheels, firmly cock a lay brake, then поддомкратьте redock of the car and establish it on props. Remove a corresponding forward wheel.

2. Give a nut of fastening of a rack of a bar of the stabilizer to the bottom lever of a suspension bracket, remove a washer and the bottom pillow of a support.

3. Liberate a rack from the bottom lever, then remove the top pillow of a support with a washer. Now the rack can be removed from the end of a bar of the stabilizer.
4. Check up rack components on presence of signs of deterioration and mechanical damages. It is necessary to give special attention to a condition of rubber pillows of support and plugs. Defective components replace.

INSTALLATION

 PERFORMANCE ORDER

1. Put on a rack a stabilizer bar, establish a washer and a rubber pillow of the top support.
2. Get a rack in the bottom lever of a suspension bracket, establish a rubber pillow and a washer of the bottom support. Screw a fixing nut. Make sure of correctness of position of a rack, then tighten a nut with demanded effort.
3. Establish into place a wheel, lower the car on the earth and tighten wheel bolts with demanded effort.