Removal and installation of the back stabilizer of cross-section stability
At assemblage new nuts of fixing bolts be required.
Removal
REMOVAL
PERFORMANCE ORDER
1. Prop up wedges forward wheels, then поддомкратьте a back of the car and establish it on props.
2. Give nuts of bolts of fastening анкерных plates of a bar of the stabilizer of cross-section stability to the bottom part of the bridge. Remove both plates and take a bar of the stabilizer from under the car.
INSTALLATION
PERFORMANCE ORDER
1. Get a stabilizer bar on the regular place and fix it анкернымискобами. Do not forget to enclose under nuts of fixing bolts of a washer.
2. Tighten both nuts with demanded effort, then lower the car on the earth.
