|
1. Necessity for carrying out of the given procedure arises only after a detachment of components of a hydraulic path.
2. Uncover a jellied mouth of the tank of the steering pump and add necessary quantity of a fresh hydraulic liquid of a demanded grade.
3. At the muffled engine some times slowly turn a steering wheel from an emphasis against the stop for the purpose of removal of air which has got to system, then once again check up liquid level. In case of need make corresponding updating.
4. Return a steering wheel in rectilinear position, then start the engine, allow to it to work within nearby 5 seconds on single turns, then again muffle.
5. Once again check up level of a hydraulic liquid, in case of need make updating, then restart the engine. Some times slowly turn a steering wheel from an emphasis against the stop. Repeat procedure performance until in the tank allocation of bubbles will not stop.
|
|
Do not keep a steering wheel of 15 seconds turned out against the stop more in order to avoid damage of the steering mechanism! |
6. If at steering wheel rotation hydraulic lines publish unusual noise, hence in a path air continues to remain. For check turn a wheel in rectilinear position and muffle the engine and if liquid level in the tank raises, hence air takes place also "prorolling" it is necessary to continue.
7. Completely having removed air, muffle the engine and allow to system to cool down, then once again check up liquid level, in case of need make updating. |
